Metal Oscillator
|
|
|
|
|
Model No. 9836Z
|
Model No. 9832ZD
|
Model No. 8836M
|
- Water coverage up to 3,600 sq. ft. (55 ft. x 66 ft.)
- 19 solid brass spray jets are set into aluminum tube for dependability and long life
- Wide, low profile base is designed for stability; it won't tip over
- Quiet water driven turbine motor
- Width adjusting levers provide infinite settings for side to side coverage
- Threaded tube tip for cleaning spray jets
- Works at water pressures ranging from 15 PSI to 150 PSI
- Swivel nut for easy connection to hose
- Metal filter washer prevents clogging
- Heavy-duty rust resistant one piece die cast zinc construction
|
- Water coverage up to 3,200 sq. ft. for small to medium size lawns
- Brass spray jets in aluminum tube for long life
- Heavy-duty, die cast metal body designed for stability
- Sealed water motor is 100% factory tested
- Threaded tube tip for cleaning spray jets
- Swivel nut for easy connection to hose
- Metal filter washer prevents clogging
|
- Water coverage up to 3,600 sq. ft. (57 ft. x 66 ft.)
- 19 solid brass spray jets are set into an aluminum tube for dependability and long life
- Heavy-duty rust resistant one piece die cast zinc construction
|
Fast Watering. 1 Hr. 20 min. of watering = 1/4” of water
Easy Care – The sealed water motor requires no maintenance. Things that will help sprinkler operate at its best are:
Clean the inlet filter washer regularly by removing and rinsing.
Remove the red plug located at the end of the spray tube to clean spray jets. Use a gentle water flow to flush out tube and the tip end of the plug to clear jets.
Drain sprinkler after use, especially in cold weather. Freezing will damage the sprinkler if water is left inside.